When you’re dealing with the installation of pipe hangers, safety and efficiency are the most crucial things to look out for. Being a well-known manufacturer of pipe hangers, we know the right setup is the key element of maintaining the piping system integrity. In this article, we will go through some of the precautions that installers should take when fitting pipe hangers to ensure high-performance state and industry compliance.
What Are Pipe Hangers?
Pipe hangers are essential elements fastened to, held, and lowered pipes in different operations like building, HVAC systems, plumbing, and fire protection. They are used to provide correct alignment and to keep the pipes from being destroyed if they move or when external forces act on them. Some of the typical pipe hanger types are:
Clevis Hanger: It is a multi-purpose hanger which can be used for many sizes of pipes, and that is generally applied in stationery non-insulated pipelines.
Pear Hanger: With a pre-galvanized or electro-galvanized surface, is specifically designed for non-insulated stationary pipelines.
Main Precautions When Installing Pipe Hangers
1. Determine Load Requirements
The load requirements for each pipe to be supported must be established before installation. Every kind of hanger has its load capability, and this load should not be crossed, as this could be the cause of the system’s damage.
2. Choose the Right Hanger Type
The choice of the appropriate type of pipe hanger is important because different situations require different types of pipe hangers. For example, clevis hangers are best for supporting vertical pipes, while ring hangers could be a better choice for the installation of lightweight piping systems.
Pipe Material: It is advised to use specific hanger types for different materials so that no corrosion or damage to the hanger occurs.
Installation Environment: Look closely if the hangers are in a place with moisture, heat, or chemicals which can impact their durability.
Pipe Size and Weight: Make sure that the selected hangers can effectively carry the weight and size of the pipe.
3. Proper Spacing and Alignment
First and foremost, in order for pipes to stay aligned and to avoid sagging, it is necessary to place the pipe hangers accordingly. The foremost important method is to follow the standards provided by the manufacturer, which will give you the exact spacing requirements that can be utilized for fire protection systems.
Have any other questions? Welcome to contact us, we will serve you wholeheartedly!
4. Secure Installation
Make sure that all hangers are properly attached to the support. Use the correct fasteners and tools to avoid any movement or loosening from time to time. For clevis rings, always use the specified number of nuts and make sure all the bolts are tightened.
5. Consider Thermal Expansion
Pipes can expand or contract in response to temperature changes, and such actions will later come back to put the hangers under the tension. Hang the pipe hangers in such a way that the expansion and contraction that comes with the temperature changes are catered for by the use of some adjustable hangers or the sliding brackets.
6. Time to check and service them regularly
Upon installation, the only way to keep the pipe hangers in good condition is by inspecting them regularly and maintaining them properly. Look for signs that are typically indicative of wear, corrosion, or slack, on the hangers, and if detected, solve the issues right away so that they don’t become unsolvable of the further degree.
7. Engage a Professional Consultant
If you’re not sure about any of the installation aspects, you are at liberty to seek the direction of a professional. Professional engineers or the kind of suppliers who have been on the field for a long time are the right people you should consult. As they will guide you through the process, give you tips and ensure that you meet all laid down standards.
Conclusion
When you want to hang pipes, you have to do this diligently, making the outcomes the focus of your full attention. If you go through all the ritualistic precautions such as checking the level of the load, the correct type of the hanger, the right distance between the hangers, and then come to regular inspections and maintenance of the system, you are left with nothing but safe and efficient installation.
At Fluid Tech Group, we are proud of introducing top-quality pipe hangers which cover clevis hangers and fire protection fittings. Our dedication to high standards and following all the norms from the industry have made us be the trustworthy partner of your pipe system projects.
In case you would like to receive additional information on our products or get a tailored solution, do not hesitate to contact us!