Grooved 11.25° Elbow

Products Details

Generally speaking, ductile iron groove fittings are usually manufactured to industry standards that ensure quality and performance. Standards for ductile iron fittings may vary depending on region, application and specific requirements. One of the commonly used reference standards for ductile iron pipe fittings is: ANSI/AWWA C606 – Groove and Shoulder Joints: This standard is published by the American Water Works Association (AWWA) and provides specifications for groove and shoulder joints for ductile iron pipe and pipe. . Accessories.

Quality inspection of ductile iron grooved pipe fittings: When checking the quality of ductile iron grooved pipe fittings, the following factors should be considered:
1. Material certification:
Ensure that the manufacturer provides a material certification to verify that the ductile iron used in the fitting meets the required standards.
2. Manufacturer’s Specifications: Check the manufacturer’s specifications and guidelines for your accessories. This information typically includes details about design, materials, and performance characteristics.
3. Third-party certification: Check whether the manufacturer has obtained third-party certification from a reputable agency. Certification from organizations such as Underwriters Laboratories (UL) or Factory Mutual (FM) may indicate compliance with industry standards.
4. Dimensional accuracy: Verify that accessories meet specified dimensional requirements, including size, wall thickness and angle.
5. Surface finish: Check whether the surface finish of the accessories is smooth and whether there are defects that affect performance.
6. Seals and gasket compatibility: Ensure accessories are compatible with specified gaskets and seals. The effectiveness of grooved joints depends on proper sealing.
7. Corrosion Resistance: Ductile iron fittings are often coated to resist corrosion. Check the type and quality of coating to ensure long-term durability.
8. Test and inspection reports: Manufacturers usually provide test and inspection reports for their products. Check out these reports to learn how to test the performance and quality of your accessories.

DRAWING：

Quality Control：

Advanced equipment guarantee the production of high quality products.

Advantages of DISA moulding line:
1. High quality precise casting less scrap and lower finishing costs.
2.High Production Efficiency
(1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2). higher profitability over a longer service life.
3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)

High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

FAQ

1. What is the minimum quantity of the order？
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order？
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.