ANSI 125/150 Grooved Adaptor Flange

Products Details

A grooved adaptor flange is a pipe fitting used in grooved piping systems to connect pipes, valves, or other equipment with flanged connections. This type of flange is designed with grooves on its mating surface, allowing for quick, secure connections using grooved couplings, washers, and bolts.

Here are general guidelines on how to use grooved adaptor flanges:

Prepare pipes and flanges:

Make sure the ends of the pipes you connect have proper grooves.
Inspect the groove adaptor flange to make sure it is clean, free of debris and in good condition.
Place the gasket:

Insert the gasket into the grooved surface of the flange. Gaskets help create a seal between the flange and the mating surface.
Align flanges:

Position the slotted adaptor flange onto the mating surface of the equipment or piping assembly.
Secure with bolts:

Pass the bolts through the bolt holes in the flange and tighten with nuts. Bolts and nuts secure the flange to the mating surface.
Tighten the connection:

Use the appropriate tools to tighten the bolts evenly to ensure a tight, even connection.
Check for leaks:

After installation, check the connections for signs of leaks. Pressure testing can be performed to ensure the integrity of the joint.
Follow manufacturer’s guidelines:

Always follow the manufacturer’s guidelines for the specific grooved adaptor flange being used.
Comply with any applicable industry standards and regulations.
Materials and connection standards:
The material of the grooved adaptor flange can vary depending on the application and is typically made of ductile iron, stainless steel, or other materials suitable for the intended use and environment. Specific materials and connection standards depend on the manufacturer and application. The following are some general standards that may apply:

Material standards:

ASTM A536: Standard Specification for Ductile Iron Castings
ASTM A182: Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges and Forged Fittings
Connection standards:

AWWA C606: Groove and Shoulder Joints for Ductile Iron Pipe and Fittings
ANSI/AWWA C111/A21.11: Rubber Gasket Joints for Ductile Iron Pressure Piping and Fittings
Be sure to refer to the manufacturer’s documentation for specific details about material composition, specifications, and installation guidelines. Additionally, local building codes and regulations should be followed to ensure compliance and safety.

DRAWING：

Quality Control：

Advanced equipment guarantee the production of high quality products.

Advantages of DISA moulding line:
1. High quality precise casting less scrap and lower finishing costs.
2.High Production Efficiency
(1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2). higher profitability over a longer service life.
3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)

High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

FAQ

1. What is the minimum quantity of the order？
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order？
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.

Please click, If you consider more detailed information

ANSI 125/150 Grooved adaptor Flange