Grooved Reducing Tee

Code:XGQT04
Size: 2”*1”-8”*6”(DN50x25-DN200x150)
Material: Ductile iron ASTM A536, 65-45-12
Dimension: ISO6182、AWWA C606、GB 5135.11
Connection:ASME B36.10、ASTM A53-A53M、ISO 4200
Thread: If have ISO 7-1,BS 21,BSPT, NPT,ASME B1.20.1
Pressure Rating: 175PSI-500PSI
Surface Treatment: Red Painting,Epoxy Coating ,Hot-Dip Galvanized,Electroplated
Bolt & nut: ASTM A449/ CLASS 8.8/ ISO 898
Gasket: EPDM, Nitrile, Silicone rubber, etc.
Certificate: UL Listed / FM Approved
Application: Fire Protection,Waterworks,HVAC,Plumbing,GAS,Irrigation,or other piping systems

We’re here to help:
Easy ways to get the answers you need.

Product Description

Products Details

A grooved reducing tee is a special type of pipe fitting used in piping systems. It is designed to connect three pipes of different diameters in systems requiring fluid flow or material transfer. A reducing tee has two openings of the same size and a third, smaller opening. Grooving in fittings refers to a method of joining pipes, usually involving grooved ends on the pipes that are held together by gaskets and fittings.

The function of a grooved reducing tee in a piping system is to achieve effective and controlled flow of fluids or substances by connecting pipes of different sizes. This type of tee is typically used when there is a need to distribute or combine flows of different volumes or to accommodate changes in pipe diameter within the system.

Standards for grooved pipe fittings are often set by industry organizations or regulatory agencies to ensure compatibility, quality and safety. American National Standards Institute (ANSI)/National Fire Protection Association (NFPA) Standard 53 is a widely recognized standard for grooved pipe fittings that covers grooved end pipe fittings used in fire protection services. Another standard is International Organization for Standardization (ISO) 6182, which provides specifications for grooved end fittings for metal pipes.

Be sure to check the specific standards and codes that apply to your region, industry, or project as they may vary. Consulting local building codes, industry regulations, or manufacturer guidelines is critical to ensuring compliance and safe operation within your duct system.

Grooved Reducing Tee

DRAWING:

Grooved Reducing Tee

Nominal Size
mm/in
Pipe O.D

mm

Working

Pressure
PSI/Mpa

Dimensions
mm/in
Certificate
L
50X25/2X1 60.3X33.7 300/2.07 70/2.57 70/2.57 FM  UL
50X32/2X1Y4 60.3X42.4 300/2.07 70/2.57 70/2.57 FM  UL
50X40/2X112 60.3X483 300/2.07 70/2.57 70/2.57 FMUL
65X32/212X114 73.0X42.4 300/2.07 76/3.00 76/3.00 FM  UL
65X40/212X112 73.0X483 300/2.07 76/3.00 76/3.00 FM  UL
65X50/212X2 73.0X60.3 300/2.07 76/3.00 76/3.00 FMUL
65X40/30DX112 76.1X48.3 300/2.07 76/3.00 76/3.00 FM  UL
65X50/30DX2 76.1X60.3 300/2.07 76/3.00 76/3.00 FM  UL
80X40/3X112 88.9X48.3 300/2.07 86/3.38 86/3.38 FMUL
80X50/3X2 88.9X60.3 300/2.07 86/3.38 86/3.38 FM  UL
80X65/3X212 88.9X73.0 300/2.07 86/3.38 86/3.38 FM  UL
80X65/3X3OD 88.9X76.1 300/2.07 86/3.38 86/3.38 FMUL
100X65/414ODX3OD 108.0X76.1 300/2.07 102/4.01 102/4.01 FM  UL
100X80/414ODX3 108.0X88.9 300/2.07 102/4.01 102/4.01 FM  UL
100X50/4X2 114.3X60.3 300/2.07 102/4.01 102/4.01 FM  UL
100X65/4X2/2 114.3X73.0 300/2.07 102/4.01 102/4.01 FM  UL
100X65/4X3OD 114.3X76.1 300/2.07 102/4.01 102/4.01 FM  UL
100X80/4X3 114.3X88.9 300/2.07 102/4.01 102/4.01 FMUL
125X50/5120DX2 139.7X60.3 300/2.07 124/4.88 124/4.88 FM  UL
125X80/5120DX3 139.7X88.9 300/2.07 124/4.88 124/4.88 FM  UL
125X100/5120DX4 139.7X114.3 300/2.07 124/4.88 124/4.88 FM  UL
150X65/6140DX3OD 159.0X76.1 300/2.07 140/5.50 140/5.50 FMUL
150X80/614ODX3 159.0X88.9 300/2.07 140/5.5C 140/5.50 FM  UL
150X100/614ODX414OD 159.0X108.0 300/2.07 140/5.50 140/5.50 FM  UL
150X100/614ODX4 159.0X114.3 300/2.07 140/5.50 140/5.50 FMUL
150X50/612ODX2 165.1X60.3 300/2.07 140/5.50 140/5.50 FM  UL
150X65/6120DX3OD 165.1X76.1 300/2.07 140/5.50 140/5.50 FM  UL
150X80/6120DX3OD 165.1X88.9 300/2.07 140/5.50 140/5.50 FM  UL
150X100/6120DX4 165.1X114.3 300/2.07 140/5.5C 140/5.50 FM  UL
150X125/6120DX512OD 165.1X139.7 300/2.07 140/5.50 140/5.50 FM  UL
150X50/6X2 168.3X60.3 300/2.07 140/5.50 140/5.50 FM   UL
150X65/6X212 168.3X73.0 300/2.07 140/5.50 140/5.50 FM   UL
150X65/6X3OD 168.3X76.1 300/2.07 140/5.50 140/5.50 FM  UL
150X80/6X3 168.3X88.9 300/2.07 140/5.50 140/5.50 FM   UL
150X100/6X4 168.3X114.3 300/2.07 140/5.50 140/5.50 FM  UL
200X100/8X4 219.1X114.3 300/2.07 175/6.89 175/6.89 FM  UL
200X125/8X5120D 219.1X139.7 300/2.07 175/6.89 175/6.89 FM  UL
200X150/8X614OD 219.1X159.C 300/2.07 175/6.89 175/6.89 FM  UL
200X150/8X6120D 219.1X165.1 300/2.07 175/6.89 175/6.89 FM  UL
200X150/8X6 219.1X168.3 300/2.07 175/6.89 175/6.89 FM   UL

Quality Control:

Advanced equipment guarantee the production of high quality products.

Advantages of DISA moulding line:
1. High quality precise casting less scrap and lower finishing costs.
2.High Production Efficiency
(1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2). higher profitability over a longer service life.
3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)

High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Grooved Reducing Tee

Grooved Reducing Tee

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

Grooved Reducing Tee

FAQ

1. What is the minimum quantity of the order?
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order?
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.

Grooved Reducing Tee