EN ERW Steel Pipe
Item: EN ERW steel pipe
Type:BS1387,BS1387 ERW steel tube,EN10255 ERW steel tube,EN10224 ERW steel tube,EN10217-1 ERW steel tube,EN10217-2 ERW steel tube
Certification:UL Listed / FM Approved
Standard: EN 10224, electrical welded, or submerged arc weld, L235
Length: 6m / 5.8m / 11.8m / 12m, customized
End: Plain (square cut) / beveled to 30° / roll groove as AWWA C606 / NPT thread as ANSI B1.20.1 / BSPT as ISO 7-1
Surface: Red paint / red epoxy resin or polyester / hot dip galvanized / black paint, etc.
We’re here to help:
Easy ways to get the answers you need.
Product Description
Products Details
Steel pipe classification method
As an important part of steel products, steel pipes are divided into two categories: seamless steel pipes (round billets) and welded steel pipes (plates, strips) due to their manufacturing processes and the shape of the pipe blanks used.
(1) Seamless steel pipe
Due to its different manufacturing processes, it is divided into two types: hot-rolled (extruded) seamless steel pipe and cold-drawn (rolled) seamless steel pipe. Cold-drawn (rolled) pipes are divided into two types: round tubes and special-shaped tubes.
a. Process overview
Hot rolled (extruded seamless steel pipe): round pipe billet → heated → perforated→ three-roll oblique rolling, continuous rolling or extrusion → de-sizing→ sizing (or reducing diameter) → cooling → billet pipe → straightening→ hydrostatic test (or flaw detection) → marking → into storage.
Cold-drawn (rolled) seamless steel pipe: round round pipe billet→ heating→perforating→ heading→ annealing→ pickling→ oiling (copper plating), →multi-pass cold-drawn (cold-rolled) →billet pipe→ heat treatment→ straightening→ hydrostatic test (flaw detection) → marking → into storage.
b. Seamless steel pipe.
(2) Welded steel pipe
The blank used in welded steel pipe is steel plate or strip, which is divided into furnace welded pipe, electric welded (resistance welded) pipe and automatic arc welded pipe due to its different welding processes. Due to its different welding forms, it is divided into two types: straight seam welded pipe and spiral welded pipe. Because of its end shape, it is divided into round welded pipe and special-shaped (square, flat, etc.) welded pipe.
Product Drawing
What are the steel pipe testing items, steel pipe testing standards
Steel pipe refers to both ends of the opening and has a hollow section, its length and the surrounding ratio of the larger steel, according to its production method can be divided into seamless steel pipe and welded steel pipe, steel pipe specifications with dimensions and wall thickness to indicate, its size range is very wide, from a very small diameter capillary tube to a diameter of several meters of large diameter pipe. Steel pipes can be used in mechanical industry, pipelines, thermal equipment, petroleum geological exploration, chemical industry, etc. The following microspectrum and everyone to understand the knowledge of steel pipe inspection.
Steel pipe detection range:
Steel pipe pile, galvanized steel pipe, carbon steel pipe, steel pipe fastener, seamless steel pipe, old steel pipe, hot-dip galvanized steel pipe, etc.
Steel pipe inspection project:
Thickness detection, eddy current testing, anti-corrosion testing, quality testing, roundness testing, corrosion testing, size testing, flaw detection, non-destructive testing, impact strength testing, etc.
Sampling specifications for steel pipe inspection:
1. The specimen used for the chemical composition analysis of steel must be taken in a representative part of the steel. The specimens shall be uniform, sufficiently representative of the chemical composition of each steel and shall be sufficient in quantity.
2. Large-section steel should be drilled from the center of the steel cross-section to the middle part of the edge parallel to the axis, or drilled from the side of the steel perpendicular to the axis centerline, at which time the drilling height should reach the axis of the steel or billet.
3. For small-section steel, chips should be planed from the entire cross-section of the steel, or drilled from the cross-section along the rolling direction.
4. Specimen cutting for chemical analysis can be drilled and planed. The cutting should be crushed and mixed evenly. Water, oil or other lubricants should not be used for cutting, and the surface iron oxide scale and dirt should be removed.
5. When there is dust or oxide layer on the surface, corresponding cleaning treatment should be done.
Application and Case
EN ERW Steel Pipe are used in fire protection system, water system, HVAC system, plumbing etc.Steel Pipe are used in many projects , such as Beijing Airport, Shanghai World Trade Center, Canton Tower and other famous landmark projects..