Grooved Cap with Threaded hole

Products Details

A grooved cap with a threaded hole is a pipe fitting characterized by an end cap with a groove and a threaded hole in the center. The grooved ends are designed for connections using grooved couplings, gaskets and coupling systems, while the threaded holes allow the installation of threaded components such as couplings or other threaded pipe fittings.

Here’s some information on what these accessories are for and how to use them:

application:

Sealing Pipe Ends: Groove caps are primarily used to seal pipe ends in duct systems.
Connection Flexibility: Threaded holes provide versatility, allowing for the connection of threaded components. This is useful for systems that require a transition between grooved and threaded connections.
How to use grooved covers with threaded holes:

Prepare the pipeline:

Make sure the pipe ends are properly grooved.
Gasket installation:

Place the gasket on the grooved end of the pipe. The gasket provides a seal to prevent leaks.
Grooved connection:

Slide the coupling over the grooved end to secure the gasket and provide a stable connection.
Threaded connection:

Insert a threaded component, such as a nipple or adaptor, into the threaded hole in the center of the groove cover.
Protect the connection:

Tighten the groove fitting securely to ensure a leak-free connection at the groove end.
Use the appropriate tool to securely screw the component into the threaded hole.
Closing:

Grooved covers effectively seal the ends of pipes, preventing fluids or substances from escaping the system.
Follow manufacturer’s guidelines:

Always follow the manufacturer’s guidelines for the specific threaded hole grooved cover being used.
Comply with any applicable industry standards and regulations.
These fittings are commonly used in industrial piping systems, HVAC systems, and fire protection systems that require a combination of grooved and threaded connections. Be sure to consult the manufacturer’s documentation and follow relevant industry standards and local codes to ensure proper installation and safety compliance.

DRAWING：

Quality Control：

Advanced equipment guarantee the production of high quality products.

Advantages of DISA moulding line:
1. High quality precise casting less scrap and lower finishing costs.
2.High Production Efficiency
(1). Fast production: 350 moulds per hour, pattern changing time cut down to 2-3 minutes
(2). higher profitability over a longer service life.
3. Safety and Environmental Friendly safe, easy and clean operation (CE and ISO 14001 compliant)

High-precision, hydraulicly driven mould transport,no shifting, distortion, ordisplacement of moulds.
The advantage of the sand supply system:The sand supply system is from the best class sand processing equipment manufacturers of China, with straight structure, easier maintenance, environmently friendly, high degree of automation, high safety factor, good parameters of sand stability.

Fluid Tech is honored as the National enterprise technical center and is capable and qualified to conduct full series of tests and inspections including chemical checking, etc. Inspection facilities include: spectrometer, carbon sulfur analyzer, metallurgical microscope, tensile strength testing equipment, pressure testing equipment, adhesive force testing equipment, CMM, hardness tester, etc.From incoming inspection to finished product, quality is checked and monitored in the whole process. Each step of the manufacturing process is carefully documented, regularly reviewed for revision control and updating standard. Quality procedures are constantly monitored and updated to assure that only the highestand most consistent quality products are supplied to our valued customers.

Application and Case

Products are used in fire protection system, water system, HVAC system, plumbing, gas system, irrigation system, etc.These products are used in many projects , such as China Taiwanese Building 101, Xiamen Building,Wuhan Expo Building and other famous landmark projects.

FAQ

1. What is the minimum quantity of the order？
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order？
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally Tianjin Port or Qingdao Port. We can transport the goods to designated warehouses, such as Yiwu, Guangzhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.