Quick Bracing Clamp UTT13

Products Details

The installation process of seismic support does not require welding and drilling. It can be easily disassembled, modified, and adjusted, and the dismantled accessories and channel steel can be reused, causing minimal waste of materials. The seismic support has good compatibility, and each profession can share a hanger; Space can be fully utilized to ensure good coordination of pipelines across various disciplines.

DRAWING：

UL Maximum Design Load
Pipe Size		lbs.	kN	Wt. Each
				1＂(25mm) Brace Pipe
				lb.	kg
1	（25）	680	(3.02)	0.71	(0.35)
1¼	（32）	680	(3.02)	0.81	(0.37)
1½	（40）	680	(3.02)	0.86	(0.39)
2	（50）	680	(3.02)	0.92	(0.42)
2½	（65）	680	(3.02)	1.01	(0.46)
3	（80）	680	(3.02)	1.08	(0.49)
4	（100）	680	(3.02)	1.21	(0.55)
5	（125）	1090	(4.84)	1.37	(0.62)
6	（150）	1370	(6.09)	1.52	(0.69)
8	（219）	1370	(6.09)	1.81	(0.82)

 

FM Maximum Design Load
Pipe Size		Horizontal load ratings installation angle 30°-44°		Horizontal load ratings installation angle 45°-59°		Wt. Each
						1＂(25mm)Brace Pipe
		Ibs.	kN	Ibs.	kN	lb.	kg
2	（50）	590	(2.62)	840	（3.73）	0.92	(0.42)
2½	（65）	710	(3.15)	1010	（4.49）	1.01	(0.46)
3	（80）	540	(2.40)	770	（3.42）	1.08	(0.49)
4	（100）	540	(2.40)	770	（3.42）	1.21	(0.55)
6	（150）	270	(1.20)	390	（1.73）	1.52	(0.69)
8	（200）	210	(0.93)	290	（1.28）	1.81	(0.82)

The function of double-U clamp

1.It can be used for bracket connection of single-tube small space lateral support or longitudinal support.
2.It is suitable for all kinds of pipe connections of DN200 and below.

How to install the quick bracing clamp

Place over the pipe to be braced,adjust brace angle,and insert bracing pipe through openingleaving a minimum of 1″(25.4)extending from attachment.Brace pipe can be installed on top or bottom of pipe to be braced but must be aminimum of6″(152.4)away from a pipe joint.Tighten nuts down evenly until 30~35N·M tomake all green making lines visible.